標題：管夾自動沖模設計
作者：楊海鵬，陳庚（江門職業技術學院機電技術系，廣東江門529090）
摘要：結合傳統的復合模與級進模設計一副自動沖模，通過自動推件機構實現沖壓自動化生產，針對不同尺寸的管夾成形只需更換模具成形零件，提高了模具設計與制造效率、縮短了模具交貨周期，降低了制造成本，達到一模多用的效果。
關鍵詞：管夾；自動沖模；級進模；工藝分析；單排排樣
中圖分類號：TG386.2 文獻標識碼：B 文章編號：1001-2168（2020）08-0027-04
DOI：10.16787/j.cnki.1001-2168.dmi.2020.08.006
Design of automatic stamping die for tube clip
YANG Hai-peng, CHEN Geng（Electromechanical Technology Department, Jiangmen Polytechinc Electrical system, Jiangmen, Guangdong 529090, China）
Abstract: An automatic stamping die combined the traditional compound die with the progressive die was designed. The automation production was realized through the automatic slide feeding mechanism. It just replaced the die parts for forming tube clips with different sizes, which made the die all-purposed.
Key words: tube clip; automatic stamping die; progressive die; process analysis; layout with a row